Elli ID. Charger, Manual

Page: 10 / 204

8
ID. Charger
EN
Gener
al inf
ormation and sc
ope
Safety and certification
Upstream installation
protection
Minimum dedicated 1-phase 32 A (32 A station) or 3-phase
16 A (16 A station) upstream circuit breaker and at
minimum RCD type A (30 mA AC). Check local installation
requirements if additional measures are required.
Static power limitation Via DIP-switches.
Earth leakage sensor (ELS) 6 mA DC.
Ground loss monitor
Physical connection monitoring,
without ground quality monitoring
Overload protection Via CT coils - optional comfort feature.
CT coils supported
Invasive / non-Invasive - 40 A - 200 A,
brands: VAC, LEM, and Nidec.
See chapter Set DIP-switches for the supported models.
Operating temperature range -30 °C - +50 °C.
Storage temperature range -30 °C - +85 °C.
Operating humidity Max. 95 % - non-condensing.
Maximum installation height Max. 4000 m above sea level.
Enclosure ratings IP54 (IEC 60529), IK10 (IEC 62262).
Certification See EU Declaration of conformity
Safety Class
Safety Class I (the charging station is equipped with a
ground terminal for safety) and overvoltage Category III.
Power supply input
EV Supply equipment permanently connected
to AC supply network.
Normal Environmental
conditions
Outdoor use.
Access Equipment for locations with non-restricted access.
Connectivity
Authorization*
NFC / RFID (ISO 14443, ISO 15693).
Plug & Charge (ISO 15118).
Status indication / HMI (Human
Machine Interface)
LED based HMI.
Communication standard*
Wi-Fi 2.4 / 5 GHz, Ethernet (via RJ45 connection),
optional 4G / LTE.