Elk Products ELK-M1G Installation And Programming Manual Download Page 32

Page: 32 / 72

M1G Installation and Programming

Page 32

123456789012345678901234567890121234

ZN001 13: =No

In CrossZonePool

Menu 05 - Zone Definitions

(continued)

Zone Definitions

Description of Option

A zone programmed ‘Yes’ for Silent Alarm will not cause any audible alarm event from a
programmable output OR from any keypad. However, a visual display will occur on the
keypad(s) which are assigned to the same area as the zone.

Helps reduce false alarm dispatches. Upon an alarm this zone the communicator will
delay dialing for the “Dialer Delay” time in Menu 09-Area Reporting Codes. If a valid code
is entered before the delay expires, report will ABORT. The communicator will transmit an
Alarm Abort code if programmed in Menu 09. NOTE: Dialer Delay Time will only start
once per alarm, regardless of additional zone trips. Default No.

†

Allows zone to trigger a listen-in session after alarm is reported. Control will hold the

line for 60 seconds after ‘kiss-off’, allowing Central Station to enter *55* to activate listen-
in. The Central Station can renew or terminate listen-in remotely. NOTE: Two-Way must
be enabled (Menu 07-Globals) and an interface (ELK-M1TWI) with one or more
microphone/speakers (ELK-M1TWS) must be installed. Default setting is No.

A Yes allows zone to be manually bypassed. A bypassed zone will be ignored by the
system. Burglar zone bypasses are cancelled upon a disarm. To bypass a zone: Press
the Bypass key + [zone number] + the Bypass key once again. Default setting is Yes.

††

Force Arm allows a violated zone to be temporarily bypassed upon arming. Prior to

arm, the READY light blinks if force arm zone(s) are the only zones violated. The keypad
will display READY FORCE. Force arm zone(s) automatically return to service if they
become normal while armed.

CAUTION! Force arm operates uniquely on entry/exit

zones! -

Entry/Exit zones that are also force armable can be violated during the exit delay

and still become force armed, allowing a user to arm, open a garage door, back out, and
close the door at their leisure, without creating a false alarm and without a long exit delay
time. As soon as the garage door is closed, it will return to service. Default setting is No.

††

Prevents a runaway communicator by shunting zone after 2 trips. Zone cannot send

another alarm until control is reset OR a 48 hour time period elapses. Default No.

This type zone must be tripped at least once per disarm cycle*. This prevents blocked
PIRs or seldom used doors from being left not secure. Keypad will display “Not Ready” if
a periodic zone has not been tripped. * NOTE: A periodic trip will not be required for a
disarm period of 1 hour or less. Default setting is No.

Response is the time the zone must be violated before the system detects it. If No, the
zone responds to the Slow response time. The time values are in milliseconds and they
are programmed in the Menu 07 Global Sys. Definitions menu. Default setting is No.

NOTE: Slow loop response shall NOT be used on Fire zones.

Each zone may be selected to be included in the Chime annunciation whenever Chime
Mode is turned on from the keypad. Most zone types may be included via this option.
Default setting is No.

††

Burglar zones “In CrossZonePool” can’t cause alarms unless another zone in the pool

also activates within a time window OR unless “Cross Zone Self Ver“ [Menu 07 - Global
System Definitions] is enabled.

DO NOT program Entry/exit zones as Cross zones.

Default is No.

NOTE: The Cross Zone feature shall NOT be used on Fire zones.

To program the text description of the Zone Name (max. of 16 characters) press the left
arrow key. Enter text using the number keys. I.E. For a “K” press the 5 key twice. To
move the cursor press the right or left arrow keys. While programming the text, pressing
the Chime key inserts a space and the Bypass key erases 1 digit. The up and down
arrow keys move between upper and lower case. Press the ELK key when complete.

123456789012345678901234567890121234

ZN001 14:Name

Zone 001

123456789012345678901234567890121234