Elite Simulation S623T, Operator'S Manual

Page: 129 / 141

1.2 Random Failures
The Random Failures panel allows you to experience what it is like to expect the unexpected.
To set up a random failure enter the failure time window interval(s). As previously described,
you can use these intervals to invoke failures immediately, at specifi ed times, or within a de-
fi ned failure time window. Then dial in the number of failures you would like to occur.
If for example we entered in a failure time window of between 3 and 12 minutes, then entered 2 in
the Instruments window, ELITE would randomly fail two of the six instruments (each at some ran-
dom time be tween 3 and 12 minutes).
The elements affected by “Random Failure” will indicate as “Fail”. When resetting the number of
random failures to 0 the “Fail” fl ags will be reset as well.
NOTE: “Engines” does NOT refer to the number of engines but rather to the number of pos-
sible engine failures.