22
English
8. Dealer’s duties
• As an ELIET dealer it is your
duty
to
instruct your customers on the operation of the ma-
chine
and to
point out the potential risks
during operation.
You are expected to carefully go over the maintenance points of the machine together with
the new owner. Repeat these instructions until the new owner has fully understood everything.
The need for pointing out the following issue to the customer is something cannot be over-
emphasized :
For your information:
As the manufacturer of the machine, ELIET wishes to re-emphasise that the
dealer must expressly point out to the customers the necessity of re-tightening
all the blade bolts
within the first 5 operating hours
.
FOR SAFETY REASONS ALL THE BLADE BOLTS MUST BE
RE-TIGHTENED
AFTER THE FIRST 5 OPERATING HOURS.
• Likewise, make sure to check the belt for correct belt tension after a run-in period of 10 hours.
• Each machine that leaves the factory contains a limited amount of oil and fuel. The dealer
must check the levels of the oil and fuel and top them up in accordance with the instructions in
this manual (or in the engine manual).
• The Dealer performs a test run on the machine and confirms that everything is functioning
properly.
• The rpm will be set at 3,200 rpm.
• The dealer will perform a test run on the machine and confirm that everything is functioning
properly (e.g. safety net; emergency stop, etc.).
• He also checks that the bolts securing the blades are fully tight.
• The dealer makes sure the machine is correctly registered on the Eliet website. This, in order
to avoid any warranty disputes. For more information, please read the warranty conditions
(“16.5 Warranty-conditions” on page 82)
