46
English
11.2.6 Putting the blow chute in working or transport position
Caution:
The machine can only be used if the blow chute is in the working position. The
machine must never be switched on if the blow chute is still in the transport
position.
• Before putting the blow chute into the transport position, you must
ensure that the deflector flaps are folded-out as far as possible. (see
“9.6.2 Turning and positioning the blowchute and deflector-flap” on
page 30). Lock them into this position.
• In order to fold back the blow chute,
the star screw (1) on the front of the
chute must first be undone.
• The blow chute is then turned so that it is facing the front
of the machine.
• Take the chute by the handle and fold it forwards so that
the two pegs (2) click into the holder (3).
• Tighten the star screw (1) so that it does not get lost.