81
English
16.4 Dashboard warnings
16.4.1 W00: Safety Bar
The safety-stop-bracket is pushed in. Pull this back out order to
activate the blade axle.
16.4.2 W01: AntiBlock Motor
When activating the motor’s ABM system, this warning will appear on the dashboard
16.4.3 W02: Speed Up Engine
The revolutions of the motor are insufficient for chipping. Set the machine to run at full gas for
chipping.
16.4.4 W03: Activate Blades
This message indicates that the blades are not engaged. Before putting wood into the machine,
the blades must be engaged. Push the Action button to do so.
16.4.5 W04: Load Too High
If the rotor blocks, the electrical coupling will disengage and the feed roller will turn backwards in
order to push out wood from the blade axle. Check the blade axle for blockages before opening
the shredder chamber. (read “11.2.5 Opening the shredding chamber” on page 43)
16.4.6 W05: Start failed
If starting takes too long, the starter motor will automatically be interrupted. First check the fuel
level and check “9.6.1 Before starting work” on page 29 to ensure that all of the points have
been fulfilled in order to start the machine.