8
5
6
7
English
59
• Prior to lubricating, the cables must be cleaned. KLEENSPRAY is again an ideal tool.
• Also spray it into the cable guide and simultaneously move the cable back and forth to
ensure that the cleaner penetrates the guide.
• Use compressed air to clean the cable guide of both cleaner and dirt.
• Repeat this procedure until the guides are completely clean.
• New lubricant may now be sprayed into the guide. ELIET recommends NOVATIO PTFE OIL.
All lubricants indicated are available from your authorised ELIET dealer.
In addition to the cable guides, the following parts also need regular lubrication:
5. Gearwheel transmission rotating blow
chute
6. Piston rod – actuator directional valves
7. Piston rod – actuator rotating movement
of cutter head
8. Piston rod – actuator height regulator of
cutter head
• When lubricating the gearwheel transmission for the rotating blow chute, a protective
plate must first be removed by unscrewing the 2 M6 bolts (slm 10).
• The procedure is the same for all other friction surfaces mentioned earlier: first loosen old
lubricant with KLEENSPRAY and wipe it away.
• Then spray NOVATIO PTFE OIL on the friction part.
• After lubricating, all protective covers must be replaced.
