English
55
11.4.3 Machine maintenance
11.4.3.1
Visual inspection
It is essential before commencing the work that the machine undergoes an inspection.
This will allow you to anticipate breakage or wear and tear that affects the life span of the
machines.
• Check whether the machine operates at the proper rotational speed at full throttle (3,200
RPM)
• Try not to change the standard settings for the engine.
• Check that no parts have been deformed, that welded seams are not cracked and that
parts are not excessively loose.
• If problems are found, carry out the necessary repairs or maintenance first.
Consult your authorised ELIET service centre for assistance if necessary or to obtain re-
placement parts. Find an ELIET service centre nearest you at www.eliet.eu.
11.4.3.2
General lubrication treatment
ELIET is committed to using high-quality materials that extend a machine’s life cycle despite
the sometimes extreme work circumstances in which snow clearers are used. For this reason,
special lubrication products have already been applied in the factory. ELIET also recom-
mends lubricating all parts on a regular basis:
•
Bearings
•
Hinges
•
Friction areas
Caution:
As applies to all maintenance work, the engine must be turned off here as well.
Remove the key from the ignition.
