6
2
5
4
3
2
1
1
English
56
A.
Lubrication via lubrication nipples
1. Cutter bearings
2. Bearings for cutter height regula-
tion system (4x)
3. Crank (2x)
4. Crank shaft (1x)
5. Reciprocating rollers for caterpillar
tracks (2x)
6. Cutter tilting mechanism (2x)
Follow this procedure:
• Clean the lubrication nipple.
• Spray on new grease in the lubricating nipple using an altered grease dispensing lever.
• ELIET recommends Sunoco Multi Purpose Grease.
• One or two pump-fulls will suffice to redistribute the new grease.
• Remove the grease that protrudes via the seams.
Caution:
Be careful when spraying new grease into the ball bearings.
The pressure that is built up with the spray could tear cap seals.
