English
29
9.5
Turning the engine off
• You are advised to put the central joystick in a central position (0 position) before switch
-
ing off the engine; in other words, do not leave it in the cruise-control position. You thus
prevent the machine from starting to move as a result of using the dead man’s handle
when starting the machine.
• Release all levers.
• Set the thrust lever to slow speed.
• Turn the starter key to the OFF position, remove the key from the lock and close the igni
-
tion using the cap.
• Keep the key in a safe place but outside the reach of children and any unauthorised per
-
sons.
For your information:
The machine is hard to move when the engine is switched off. It is therefore
advisable to first move the machine to the desired location before switching the
engine off.
9.6
Working with the machine
9.6.1
Prior to starting work
Warning:
Never run the engine in a closed environment for over 30 seconds. There is a
risk of carbon monoxide poisoning from the exhaust if you do so. If the machine
is stored inside, doors and windows will be opened for maximum ventilation
before starting the engine to move the machine.
Caution:
Sturdy shoes that provide sufficient support and adequate protection must be
worn when working with the machine. There is a risk of the machine passing
over the feet during an erroneous manoeuvre. Ensure that the soles of the
shoes have sufficient grip so that you do not slip on icy or frozen ground.
Important:
Before starting work, ensure that the cutter head’s skid shoes are correctly aligned. To do so,
you are referred to § 11.4.3.6 Setting Cutter Blade
