1
1 Nomenclature
1 Joystick
Incline joystick to move the instrument slightly on the horizontal surface and
rotate it to adjust the elevation of the microscope.
2 Base Locking Screw
The base will be locked when fastening this screw.
3 Rail Cover
Protect the rail surface.
4 Base
Support the microscope and the illumination arms with the joystick controlling its
movement.
5 Work Table
6 Accessory Drawer
Store the focusing test rod and other accessories.
7 Brightness Control Switch
The brightness can be continuous adjusted. Avoid working continuously at high
setting, as the service life of the bulb will be shortened.
8 Main Power Switch
9 Pilot Lamp
10 Microscope Arm Locking Knob
Lock the rotational movement of the microscope arm.
11
Angle Mark Ring
Marks on the angle mark ring of the illumination arm, which relates to the long
mark of the microscope arm, represent the two arms’
angle.
When the ‘0’ on the
ring relates to the short mark at one side of the operator, the right eyepiece may
be
blocked,
and the side of the patient the left eyepiece.
12
Chin-rest Elevation Adjustment Knob
Rotate the knob to adjust the elevation of the chin-rest
13
Location Roller
When it is in the
middle,
it stands for included angle of 0
o
between the microscope
arm and the illumination arm. And the right or left side the included angle of 10
o
.
14
Microscope and Illumination Arm Couple Bolt
Fasten this bolt and the illumination arm and the microscope arm could rotate
together
in couple state
. Loosen it and the illumination arm then can rotate
sep
a
rately.
15
Hruby Lens Guide Plate
Also used as an assembly plate for the applanation tonometer.
16
Breath Shield
17
Chin-rest
18
Magnification Select Dial
Five different magnifications are provided.
19
Prism Box
Separate the prism box to adjust the interpupillar distance.
20
12.5X Eyepiece
Before using the slit lamp, adjust the proper diopter for each eyepiece to obtain a