BASIC Step-by-Step Instructions for JEOL 6060LV
Version 4/13/11
General Operation
1.
Check System: Pumps running and EVAC light green (main panel near key switch)?
If not notify a staff member.
2.
If the SEM software is not running, start SEM Software (
SEM Main Menu
icon). It
takes several minutes to start, be patient. If you need to log into computer use the
account (USER:jeol;PASSWORD:jeol). Please do not log into other accounts. Use
portable media, ftp, or UIUC NetFiles to transfer your data.
3.
Prepare your samples before venting! Please keep the area clean, organized, and wear
GLOVES!! Anything that goes in the vacuum should be clean and handled only with
gloves or tweezers; keep the vacuum clean.
4.
Press the
Sample
button on toolbar.
5.
Press the
Vent
button; it takes a couple minutes to vent.
6.
When Vent light stops blinking (main panel near key switch), slide open stage
drawer.
