ELGO Electronic P40-000 Series, Operating Manual

Page: 30 / 64

Axis Menu
- 30 -
Spindle compensation mode

without (no spindle compensation)

negative spindle compensation −

positive spindle compen

with forced loop –

with forced loop +
Software end-position
 both enabled
 negative disabled

positive disabled

both disabled
Hardware end-position

both (defined inputs) enabled

negative (defined input) disabled

positive (defined input) disabled

both disabled
Retract mode

Mode 1 retract to actual value + adjusted retract length* with return

Mode 2 retract to adjusted retract length* with return

Mode 3 retract positive to actual value for the adjusted retract time** with return

Mode 4 retract to actual value + adjusted retract length* without return

Mode 5 retract to adjusted retract length* without return

Mode 6 retract positive to actual value for the adjusted retract time** without return

Mode 7 retract to actual value – retract length* with return

Mode 8 retract negative to actual value for the adjusted retract time** with return

Mode 9 retract to actual value – adjusted retract length* without return

Mode10 retract negative to actual value for the adjusted retract time** without return
* see parameter axis

X-/Y-axis

distances

retract length
** see parameter axis

X-/Y-axis

times

retract time
Error compensation
The setting defines the acrivity of the error compensation at incremental measurement positioning.

off

on