Type Designation
- 59 -
18
Type Designation
NOTE
When ordering, please use the here described ordering code (Type Designation).
Options that are not required are filled in with „-„.
P40
024
XX
Device Designation:
P40 = Position Controller for 1 or 2 axes
Power Supply Voltage:
024 = 24 VDC (+10 / -20 %)
Encoder Inputs (per Axis):
X
= input is not available
1 = A, B, Z (PNP)
24 V supply / HTL, 100 kHz
2 = A, A‘, B, B‘, Z, Z‘
24 V supply / TTL 100 kHz
3 = A, A‘, B, B‘, Z, Z‘ 5 V supply / TTL 100 kHz
4 = 1 analog inputs
3.3 V supply / 0 ... 3.3 V (12 bit)
1
5 = 2 analog inputs
3.3 V supply / 0 ... 3.3 V (12 bit)
2
6 = A, B, Z (PNP)
24 V supply / HTL, 100 kHz
3
+ 1 analog input
3.3 V supply / 0 ... (customer specified)
Version:
000 = standard version
001 = first special version
002 = second special version (etc.)
-
Options:
X
= no further options
C
= screw terminals
8
= 8 digital inputs / 8 digital outputs
5
XXXX
-
-
- 000
XX
-
Restrictions:
Analog Output (per Axis):
X
= no analog output (switch-off positioning)
1
= 12 bit analog output ±10 V (PID regulated)
4
2
= 12 bit analog output ±10 V (unregulated)
1
for special applications (e. g. as auxiliary axis)
2
for special applications, analog inputs only for and on plug 2. Axis
3
for special applications and only possible for 2. Axis
4
not possible with "Encoder Inputs = 4 or 5“
5
not possible for two axes and not possible with analog output
Summary of Contents for P40-000 Series
Page 61: ...Accessories 61 Notes...
Page 62: ...Accessories 62 Notes...
