ELGO Electronic P40-000 Series, Operating Manual

Page: 41 / 64

System Menu
- 41 -
Incremental positioning negative
If this input is active, the incremental positioning is in negative direction, if incremental positioning
is externally configured (parameter axis

X-/Y-axis

settings

incremental positioning

external).
Incremental positioning positive
If this input is active, the incremental positioning is in negative direction, if incremental positioning
is externally configured (parameter axis
 X-/Y-axis  settings  incremental positioning  external).
Retract function
The retract function will be started if the input is activated
Piece counter
With every pulse at this input, the current quantity is increased or decreased by one piece.
Settings: parameter axis

X-/Y-axis

settings

piece counter

decrement

dec stop

increment

increment/decrement
Switch endposition min/max

switch end-pos. min

switch end-pos. max
The switch end-position inputs are monitored during the positioning. If a switch end-position input is
activated, no positioning in the corresponding direction is possible respectively the positioning will be
cancelled.
Key manual mode <Axis +/−>
If an input is assigned here, the corresponding axis can be positioned in the corresponding direction
via an external key in the manual mode (joystick-function).
Tool offset
As long as this input is activated, the parameter axis

X-/Y-axis

distances

toolcorrection will be
added to the actual value.
Fix position
If the input is activated the axis moves to the fix position which is defined in parameter axis

X-/Y-axis

distances

fixposition
Enable axis
The input is monitored during the positioning. If the input is activated, no more positioning is possible
resp. the positioning is canceled and an error message is set.