Elgar SmartWave SW1750A, Operation Manual

Page: 52 / 94

Operation SW 5250A•SW 3500A•SW 1750A
3-8 Operation Manual
3.3.3 MEASURE Menu
If equipped with the Test and Measurement option, the MEASURE menu allows you to:
•
Measure voltage (RMS)
•
Measure current (RMS)
•
Measure frequency
•
Measure phase angle (referenced to a master)
•
Measure power (W)
•
Measure apparent power (VA)
•
Measure power factor (PF)
•
Measure peak current.
PROGRAM
MEASURE
WAVEFORM
SEQUENCE
INSTR
SYSTEM
AMPL A 120.00 V
OFF 0.00
OFF 0.00
OFF 0.00
OFF 0.00
OFF 0.00
MAIN MENU OUTPUT [OFF]
The Measure menu contains six display fields that can be set to any of the available
measurements. To set a measurement field:
1. Move the field select cursor to one of the six measurement fields.
2. Press < Enter >. A pop-up window entitled SELECT MEASUREMENT will
appear; OFF will be selected.
3. Press the Up/Down Arrow keys or use the Knob to scroll through the list of
available measurements.
4. With the desired measurement in the selection window (or OFF to disable a
measurement), press <
Enter >.
The measured value will be displayed in the display field. Active measurement fields
are continually updated and retained upon cycling power to the unit.