Elgar SmartWave SW1750A, Operation Manual

Page: 14 / 94

General Description SW 5250A•SW 3500A•SW 1750A
1-2 Operation Manual
The SmartWave model numbers are identified below:
SW5250 A–1–3–2–XXX
Power Options:
5250
3500
1750
Chassis Description:
A = Standard High Impedance
AE = Standard IEC Low Impedance
M, ME, S, SE = N/A
Power Conditioning Options:
1 = Rectifier USA
2 = Rectifier International
3 = PFC USA
4 = PFC International
5, 6 = N/A
Controller Options:
1 = Manual
2 = GPIB
3 = Arbitrary GPIB
Test and Measurement Options:
1 = No T&M
2 = Standard T&M
Non-Standard Options:
Blank = None
Programming is accomplished at the front panel or with a personal computer (PC) using
optional software. A GPIB card in the computer is also required.
A library of 50 factory-supplied waveshapes is provided in Flash Memory. Non-volatile
memory storage is available for an additional 50 user-created waveshapes.
Waveshapes from the libraries can be assigned amplitude and frequency parameters
and be stored as setups in non-volatile memory for immediate user recall. In addition,
you can create up to 1000 timed segments and link them together to form sequences
(transient programs).
The backlit graphics LCD display allows quick confirmation of waveforms when created
or edited from the front panel. Front panel BNCs provide waveform reference outputs
for oscilloscope viewing. The front panel also includes a keypad, a rotary knob, and
Help screens.