PURELAB flex
Introduction
Issue 4
Page
4
of
45
Health and Safety
WARNING!
WARNINGS ARE GIVEN WHERE FAILING TO OBSERVE THE
INSTRUCTIONS COULD RESULT IN INJURY OR FATALITY.
CAUTION!
Cautions are given where failure to observe the
instructions could result in damage to the equipment,
associated equipment and processes.
Environment
CAUTION!
Clean dry indoor. Temp 5-40°C. Humidity max
80% non-condensing.
Failure to follow the environmental specification could
result in damage to the system.
The PURELAB flex is not designed for use in fume
cupboards where chemicals could damage the system.
Display Handset
CAUTION!
The display handset is not designed to be submersed in
water.
Electricity
WARNING!
POSITION THE POWER SUPPLY SO THAT IT CANNOT COME
INTO CONTACT WITH WATER.
Ultraviolet Light
WARNING!
UNDER NO CIRCUMSTANCES SHOULD THE LAMP BE
CONNECTED AND ACTIVATED WHEN OUTSIDE THE
HOUSING. EXPOSURE COULD CAUSE SERIOUS INJURY TO
EYES AND SKIN.
ENSURE THE UV LAMP IS DISPOSED OF IN ACCORDANCE
WITH LOCAL REGULATIONS.
Residual Biostat
WARNING!
DURING THE COMMISSIONING CYCLE TRACE RESIDUAL
BIOSTAT IS FLUSHED FROM THE SYSTEM. A MATERIAL
SAFETY DATA SHEET IS AVAILABLE UPON REQUEST.
Control of Substances Hazardous to Health (COSHH)
Material safety data sheets covering the various replaceable Purification Packs are available upon
request.
If in doubt always seek advice before commencing work on ELGA products. Please contact the technical
support department at
for more information.
