MEDICA EDI
– US Operator Manual
ELGA
Page 4
MEDICA EDI
–US MANU40685 Ver 2 – 10/15
1.
INTRODUCTION
1.1
Use of this Manual
ELGA LabWater strives to produce manuals that are as simple and accurate
as possible. However, should you feel they can be improved in any way
please email us at
This manual guides you through the installation, commissioning and basic
operation of the
MEDICA EDI - US
allowing you to obtain a guaranteed
supply of purified water to meet your requirements. For more detailed
information refer to the Operator Manual supplied on CD.
1.2
Customer Support
Service support and consumable items are available from your local supplier
or distributor. Please contact
1.3
HEALTH AND SAFETY NOTES
WARNING!
WARNINGS ARE GIVEN WHERE
FAILING
TO
OBSERVE
THE
INSTRUCTIONS COULD RESULT IN
INJURY OR FATALITY.
CAUTION!
Cautions are given where failure to
observe the instructions could result
in
damage
to
the
equipment,
associated
equipment
and
processes.
1.4
Electricity
It is essential that the electrical supply to the
MEDICA EDI - US
is isolated
before any items are changed or maintenance work performed.
The appliance coupler (mains lead) connected to the rear of the unit can be
removed to isolate the power supply. If access to this is restricted then it is
recommended that access to the supply socket is easily available to
disconnect the electrical supply.
The unit must be earthed. Use of the recommended appliance coupler will
ensure adequate earth protection.
WARNING!
IF THE EQUIPMENT IS USED IN A
MANNER NOT SPECIFIED BY ELGA,
THE PROTECTION PROVIDED BY
THE EQUIPMENT MAY BE IMPAIRED.
1.5
Pressure
The water supply should be isolated and residual pressure released prior to
removal of any components or carrying out work on the unit.
Switch off the process and relieve pressure in the distribution loop by
opening a point of use or dispense tap.
Summary of Contents for MEDICA EDI - US
Page 1: ...MEDICA EDI US Operator Manual ...
Page 2: ......