claros pico user manual V 2.1
page 26 of 34
11
Disposal
11.1
Packaging
elexxion AG recommends retaining the unit's packaging so that it can be sent off correctly in the event of servicing. In
order to dispose of packaging, please contact your elexxion AG representative or dispose of the packaging in
accordance with applicable legal regulations.
11.2
Device
The system must be disposed of correctly at the end of its service life in order to prevent environmental damage
and rule out the possibility of improper use. The device must be taken to or sent to an authorised service company.
Where necessary, the system must be secured to prevent accidental reuse before disposal. The usual risks
concerning the disposal of electronic devices apply.
Batteries and the claros pico device containing batteries must not be disposed of in household waste. They should
instead be taken to or sent to an authorised service company.
12
Technical data
12.1
Description of the beam guiding system:
Laser diodes: gallium aluminium arsenide (GaAlAs). The divergent beam is focused internally on a defined point in front
of the laser aperture by a multiple-lens system. By inserting an optical fibre with NA (numerical aperture) = 0.22 or 0.37
and an SMA screw connection, the focal point is projected onto the fibre input (plug) and the beam is guided to the
application end of the fiber with virtually no losses by means of total internal reflection and emitted at an angle of 13°
(divergence).
12.2
Laser aperture:
The laser aperture is located at the distal end of the handpiece. This is where application parts are connected to the
handpiece. When the applicator is connected, the distal end of the handpiece (application fiber or glass rod) forms
the laser aperture. Laser emission may only commence when the applicator (application fiber or glass rod) is
connected.
12.3
Disconnection from the mains (charging mode):
In order to disconnect the device from the mains, unplug the mains adapter plug.
Changes to the device and its accessories are not permitted and may result in dangerous operating conditions.
claros
pico
technical data
12.4
Technical data power supply:
Mains supply:
100-240 VAC/60,50 Hz
Current consumption:
0.4 A max.
