claros pico user manual V 2.1
page 21 of 34
6.4.1.2
Adjusting the fiber length
Open the locking device by twisting parts 1 and 2 anticlockwise. A quarter turn is sufficient. Hold on to part 2 and twist
part 3 to adjust the fiber length.
Turning clockwise => increases the fiber length;
Turning anticlockwise => shortens the fibe length.
When you have reached the desired fibre length, lock the handpiece by twisting parts 1 and 2 clockwise. Bend the thin
metal tube of the soft metal tip into the desired position using the bending tool.
Straighten the tube after use. Then separate the handpiece from the fiber cable and pull the fiber out of the handpiece.
Do not adjust the fiber length when the tube is bent!
6.4.2
ergo T
The ergoT handpiece can be used with the two glass rods T4 (optional) and T8. The glass rods are used in all therapy
programs and for bleaching. The application information on the list of applikations shows which glass rod is used in
the relevant program.
To insert the glass rod, undo the fixing nut on the ergo T handpiece and introduce the glass rod into the handpiece as
far as it will go.
After this, tighten the fixing nut by hand so that the glass rod sits firmly.
R e m o v e t h e s a f e t y c a p f r o m t r a n s m i s s i o n f i b r e , p u l l t h e i n t e r l o c k r i n g t o t h e r e a r a n d p r e s s t h e
h a n d p i e c e i n t o t h e h an dp i e c e h o l d e r u n t i l i t c an b e h e a r d t o e n g a g e .
To undo the handpiece, the interlock ring must be pulled back.
