3
USER MANUAL
RPS/M/1K
Elettrotest S.p.A. P.zza R. Riello, 20/B - 45021 Badia Polesine ( RO ) - tel. +39 0425 53567 - Fax +39 0425 53568
e-mail:
http:
62000582 Rel.1.0 – 15/03/2018
Do not operate or store under conditions where condensing may occur or where
conductive debris may enter in the case.
The manufacturer declines all responsibility for damage to people or things
caused by an improper use of its products.
1.1.3.
RISK TYPOLOGY
ELECTRIC RISK
There are dangerous voltages inside RPS and over the output connector.
The non-observance of the warnings suggest in this manual can lead to electric shocks, even
fatal ones.
OVERHEATING RISK
In the case of a ventilation system failure, the metal parts of the inverter may reach high
temperatures (in some cases greater than 70°C).
1.2.
VOLTAGE OUTPUT
The output voltage is guaranteed perfectly sinusoidal, with a distortion of less than 0.3%
regardless of the load. The value of output voltage is kept perfectly stable within 0.1% regardless
of the load.
RPS is also able to compensate for possible voltage drops on the output wires, ensuring in this way
the exact voltage you want on the load.
The load that RPS is able to drive can vary from the pure capacity to the pure inductance, but also
up to non symmetrical current loads, as for instance a single half wave rectifier.
The output voltage is adjustable with continuity from zero to full scale. Furthermore RPS is capable
to keep the voltage stable also with time variable loads, as for example the pulsating loads. In fact
RPS recovers the distortion of the waveform within 0.3% and the amplitude of the voltage within
0.1% in less than half period.
