11
USER MANUAL
RPS/M/1K
Elettrotest S.p.A. P.zza R. Riello, 20/B - 45021 Badia Polesine ( RO ) - tel. +39 0425 53567 - Fax +39 0425 53568
e-mail:
http:
62000582 Rel.1.0 – 15/03/2018
2.3.2.
RPS1000
2.4.
OUTPUT RELAY
It’s possible to open or close the output relay both serial command or digital input. Before opening
the relay, the output voltage is switched to zero to safeguard the relay. Similarly, the closing is
done with zero voltage. Later the output will reach the set value through a voltage ramp (set via
serial commands).
The turn off of the output relay does not allow operations on the EUT connections.
