code: UMS012
review: 0.2
date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual
page 81 of 102
8.5.4.4
Date/time settings page
Fig. 8-10
–
Date/time settings page
This display area shows the day.
Next to this area you will find the controls that, when pressed, allow the operator to increase (+) or decrease (-) the set
value by one unit.
This display area shows the month.
Next to this area you will find the controls that, when pressed, allow the operator to increase (+) or decrease (-) the set
value by one unit.
This display area shows the year (last two numbers).
Next to this area you will find the controls that, when pressed, allow the operator to increase (+) or decrease (-) the set
value by one unit.
This display area shows the hour.
Next to this area you will find the controls that, when pressed, allow the operator to increase (+) or decrease (-) the set
value by one unit.
This display area shows the minutes.
Next to this area you will find the controls that, when pressed, allow the operator to increase (+) or decrease (-) the set
value by one unit.
This display area shows the seconds.
Next to this area you will find the controls that, when pressed, allow the operator to increase (+) or decrease (-) the set
value by one unit.
When pressed, this control area allows the operator to “save” the date and the time set in
this page.
When pressed, this control area allows the operator to return to the “Settings” page (paragraph
3
7
8
1
2
6
4
5
Summary of Contents for MS 3.5
Page 105: ...code UMS012 review 0 2 date 20 04 2022 Laser Welding machine MS 3 5 annexes...
Page 106: ......
Page 107: ......
