ELETTROLASER MS 3.5, End-User And Maintenance Manual

Page: 26 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 26 of 102
5.2 Applicable technical regulations and laws
The machine was designed in observance of the following Community rules on the safety of the machinery and laser
system products:
•
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction;
•
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines – Part 1: General requirements;
•
CEI 76-11:2011 Safety of laser products - Part 14: User guide (IEC TR 60825-14:2004);
• EN 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements;
•
EN 61000-6-2:2005/AC:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards Immunity for
industrial environments;
•
EN 61000-6-4:2007/A1:2011 Electromagnetic compatibility (EMC) - Parte 6-4: Generic standards - Emissions for
industrial environments;
•
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equip
ment input current ≤ 16 A per phase);
•
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage
fluctuations and flicker in public low-
voltage supply systems, for equipment with rated current ≤ 16 A p er phase
and not subject to conditional connection.
Furthermore, the following European Community directives were also observed:
•
European Parliament and Council Directive 2006/42/CE dated May 17
th
2006 on machinery, modifying Directive
95/16/CE (recasting);
•
European Parliament and Council Directive 2014/30/UE dated February 26
th
2014 and concerning the
harmonization of member State legislations on electromagnetic compatibility (recast);
•
European Parliament and Council Directive 2014/35/UE February 26
th
2014 and concerning the harmonization of
member State legislations on making available on the market electrical material for use within specific voltage
limits.
•
European Parliament and Council Directive 2011/65/UE dated June 8
th
2011 on the restriction of use of specific
hazardous substances in electric and electronic equipment;
•
Delegated directive (UE) 2015/863 dated March 31
st
2015 modifying annex II of European Parliament and Council
Directive 2011/65/UE with regards to the list of substances characterized by restrictions of use.
INFORMATION!: Even if the machine is compliant with applicable EU Directives, we cannot exclude that these may be (or have
been) implemented via specific legislation at a local (national) level.
5.3 Intended conditions of use
MS 3.5 was designed exclusively to perform operations described under paragraph 5.1 of this manual.
The machine must operate in environmental conditions that comply with the descriptions featured in the specific section (Permissible
environmental values) of Tab. 5-3.
In terms of typology and dimensions, the product on which the machine operates must comply with requirements listed in the
paragraph on characteristics of the product (5.6).