ELETTROLASER MS 3.5, End-User And Maintenance Manual

Page: 32 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 32 of 102
5.6 Product characteristics
5.6.1 Technical characteristics of workable products
The products to be processed (an example is shown in Fig. 5-3) consist of products for the goldsmith/jewelry sector, such as, for
example: jewels and glasses, watches and bracelets
.
Fig. 5-3 –
Examples of products to be processed for the goldsmith sector
To be workable with MS 3.5 products must be made exclusively with the materials listed in the following Tab. 5-7.
Technical characteristics of workable products
Dimensions Maximum size of the product
(L x W x H)
400x150x110 mm
Materials Titanium
Yellow gold
Rose gold
White gold
Platinum
Steel
Palladium
Nickel silver
Tab. 5-7 –
Permissible materials
PROHIBITION!: Use of the welding machine to weld different materials than those indicated in the “Usable materials” table above
IS STRICTLY PROHIBITED. If you need to weld different materials, we invite you to contact the manufacturer. Do not attempt to
weld different materials than those indicated above, in any way.
It is forbidden to weld flammable materials.