ELETTROLASER MS 3.5, End-User And Maintenance Manual

Page: 38 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 38 of 102
machine ) located directly on the worktable, under the machine (as schematically illustrated in Fig. 6-5), and corresponding with the
product smoke output grid (Fig. 6-6).
Fig. 6-5 – Ideal installation on worktable
WARNING!: Welding operations produce smoke and gas: breathing these can be harmful for human health.
OBLIGATION!: The smoke extraction system (not supplied with the machine) must ensure an adequate aspiration level during all
work phases.
Minimum suction capacity of this system depends on multiple factors (environmental, related to how frequently the machine is
used, and so on).
Before being released into the environment, the smoke must be filtered.
Suction vent hole