ELETTROLASER MS 3.5, End-User And Maintenance Manual

Page: 39 / 108

code: UMS012 review: 0.2 date: 20/04/2022
Laser Welding machine - MS 3.5
user and maintenance manual page 39 of 102
6.7 Assembly
The machine is supplied fully assembled.
To install the machine, proceed as follows:
•
Place MS 3.5 on the work surface (please also refer to paragraph 6.6), so that:
▪
It is leaning all four feet (Fig. 6-6);
▪
The welding chamber is positioned outside the work surface, with the lower rear side leaning on the edge of the surface;
Fig. 6-6 – View of machine support base
Fig. 6-7 –
Positioning on the work surface
Support foot
Support foot
Base of the welding
chamber
Product smoke output
grid
Welding chamber
Work surface
Support foot