End position setting
Installation method 4: Upper end position freely
adjustable/fixed lower limit stop
EN | 7
Installation method 4: Upper end position freely
adjustable/fixed lower limit stop
1. Move the blind up to approx. 5 cm before the desired upper
end position.
The drive starts up slowly with a short STOP.
STOP
3. Press the
DOWN
button until the drive stops automatically.
The upper end position has been set.
5. Approach the lower limit stop.
The drive switches off automatically when it reaches the limit
stop.
Note:
Ensure that the equipment is correctly connected.
(Assembly cable or transmitter operation)
STOP
6. Press the
UP
button until the drive stops automatically.
The lower end position has been set.
Setting of the end positions is now complete.
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
2. Press the
UP
button again.
Go to the desired upper end position.
It is possible to make corrections using the buttons.
4. Press the
DOWN
button again.
Run the blind until shortly before the lower limit stop.
The drive starts up slowly with a short STOP.
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Approach intermediate position 1
→ see transmitter instructions
Approach intermediate position 2
→ see transmitter instructions
Delete intermediate position 1
→ see transmitter instructions
Delete intermediate position 2
→ see transmitter instructions
STOP
STOP
STOP
