4 | EN
End position setting
Installation method 1: Upper/lower end position freely adjustable
Installation method 1: Upper/lower end position freely
adjustable
1. Move the blind up to approx. 5 cm before the desired upper
end position.
The drive starts up slowly with a short STOP.
STOP
3. Press the
DOWN
button until the drive stops automatically.
The upper end position has been set.
5. Travel to the desired lower end position.
It is possible to make corrections using the buttons.
Note:
Ensure that the equipment is correctly connected.
(Assembly cable or transmitter operation)
STOP
6. Press the
UP
button until the drive stops automatically.
The lower end position has been set.
Setting of the end positions is now complete.
Note:
The blind protection system is only adapted to the blind
after a complete, uninterrupted upwards and downwards
travel.
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
2. Press the
UP
button again.
Go to the desired upper end position.
It is possible to make corrections using the buttons.
4. Press the
DOWN
button again.
Move the blind down until it is a short distance above the
desired lower end position.
The drive starts up slowly with a short STOP
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
STOP
STOP
