End position setting
Installation method 2: Fixed upper limit stop/lower
end position freely adjustable
EN | 5
5. Travel to the desired lower end position.
It is possible to make corrections using the buttons.
STOP
6. Press the
UP
button until the drive stops automatically.
The lower end position has been set.
Setting of the end positions is now complete.
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
4. Press the
DOWN
button again.
Move the blind down until it is a short distance above the
desired lower end position.
The drive starts up slowly with a short STOP.
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
1. Move the blind up to approx. 5 cm before the upper limit stop.
The drive starts up slowly with a short STOP.
STOP
3. Press the
DOWN
button until the drive stops automatically.
The upper end position has been set.
Installation method 2: Fixed upper limit stop/lower
end position freely adjustable
Note:
Ensure that the equipment is correctly connected.
(Assembly cable or transmitter operation)
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
Auto
VarioTec
Reset
Pos Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
2. Press the
UP
button again.
Approach the upper limit stop.
The drive switches off automatically when it reaches the limit
stop.
STOP
STOP
STOP
