Connection/Installation/Commissioning
2 | EN
Types of installation
Different types of installation are possible:
Type of installation
1. Upper/lower end position freely adjustable
2. Fixed upper limit stop lower end position freely adjustable
3. Fixed upper and lower limit stop
4. Upper end position freely adjustable, fixed lower limit stop
Commissioning
Note:
The drive is in commissioning mode when delivered.
Remove of the motor cable plug
Risk of injury due to electric
shock.
When the motor cable plug
is removed the supply line
must
be volt free.
Remove the motor cable plug
Switch off voltage supply.
1. Press locking mechanism on the plug towards the cable using a
screwdriver.
2. Pull out the plug.
Insert the motor cable plug
3. Switch off voltage supply. Insert plug until locking mechanism
engages.
Delivery condition
2
Insert plug
Remove plug
1
3
Warning!
S
S
S
Explanation of ProLine buttons
Hand-held/wall transmitter
UP
button
STOP
button
DOWN
button
Auto
VarioTec
Reset
Pos
Pos
Auto
VarioTec
Pos
Pos
Reset
Reset
Pos
P
VarioTec-868
Auto
Pos
Reset
VarioTec-868
P
Pos Pos
UP
button
STOP
button
DOWN
button
Programming button
P
(Back of unit)
Programming
button
P
Assembly cable connection
(only permissible for commissioning or setting procedures)
2.
Switch on mains.
Blau (Neutralleiter)
Schwarz
Braun
Grün-gelb
3
2
1
3
2
1
elero
%OXHQHXWUDOZLUH
%ODFN
%URZQ
*UHHQ\HOORZ
Mains
Radio connection (transmitter operation)
1.
2.
Switch on mains.
You can now set the end positions with the assembly cable.
Please note:
Press the travel key until the drive signals the
transition into the programming mode, by a short
automatic STOP.
You can now program the end positions.
Rückseite Wandsender
3.
The drive travels upwards and downwards for a short time.
The motor is in radio mode.
You can now program the transmitter.
Only at commissioning
Lower limit stop
Upper limit stop
Winding
shaft
Blind awning
fabric
Blau (Neutralleiter)
(1)
Schwarz
(2)
Braun
(3)
Grün-gelb
3
2
1
3
2
1
elero
%OXHQHXWUDOZLUH
%ODFN
%URZQ
*UHHQ\HOORZ
Mains
1.
