Initial operation/Factory settings
GB-8
Connection
GB-7
Initial operation
To activate the AstroTec timer, touch any button on the device. To
select the language required use the
+/-
buttons and confirm your
selection with the
OK
button. The AstroTec is now in automatic
operating mode.
Factory settings
TIME/DATE:
– Current GMT and current date
PROGRAMME: – ASTRO
W
BLOCK
W
IDLE PERIOD (1-5)
v
06:30 HRS
b
No default idle period
IDLE PERIOD (6,7)
v
08:00 HRS
b
No default idle period
SETTING:
– HOLIDAY OFF
– light sensor SUN 05 sunlight value
(if light sensor is connected)
– END LIMIT, location
– SUMMER/WINTER ON
FUNCTION:
– ROLLER SHUTTER, DRIVE CONTROLLER, EXTERNAL
SWITCH, ALARM SIGNAL ON, EXPERT MODE OFF
Note !
Press the RESET button (with a ballpoint pen or similar
object) to restore the factory settings of the AstroTec.
Exception:
Function menu, language selection and city
selection.
GB
pushbutton
Blind
Central
Individual
2
1
6
4
3
5
N
AstroTec
L
C
L
N
Mains
Output
Input
To other
control devices
To other
control devices
3. Replace the protective caps on the power supply unit.
4. Secure the power supply unit in the box.
Insert the operating device into the frame and insert it into
the power supply unit.
Connection as a group controller
For details on suitable control systems, please refer to the control
product catalogue.
Warning!
Risk of injury by electric shock !
• Terminal connections must be carried out by an
authorised electrician!
1. Remove the protective caps.
2. Connect.
Note:
Always use a shielded
control wire . . . *0.8 mm
l
or telephone line
JY-ST . . . *0.6 mm
l
.
