Installation/connection
GB-6
General/Designated use
GB-5
GB
Installation
General
The AstroTec, delivered from the factory with current date and time
settings (GMT), automatically controls the drive at the astro times
(sunrise and sundown).
The AstroTec can be operated manually at any time.
The easy-to-install light sensor allows the AstroTec to be extended
to include a convenient sunshade function (shading plants and
furniture).
Designated use
The AstroTec may
only
be used to control roller shutter and venetian
blind systems.
Connection of other devices must be carried out in consultation
with specialised dealers.
M
Blind
pushbutton
Central
Individual
2
Lumo
1
6
4
3
5
N
1~
AstroTec
N
L
L
PE
Mains
C
To other
control devices
astrotec
230 V/50 Hz
3. Replace the protective caps on the power supply unit.
4. Secure the power supply unit in the box.
5. Insert the operating device into the frame and insert it into
the power supply unit.
Connection as a drive controller
For details on suitable control systems, please refer to the control
product catalogue.
Warning!
Risk of injury by electric shock!
• Terminal connections must be carried out by an
authorised electrician!
• If more than one drive is operated using the AstroTec,
the drives must be decoupled by relay controls.
• The switched current of the device must be observed
at all times!.
1. Remove the protective caps.
2. Connect.
Note:
Always use a shielded
control wire . . . *0.8 mm
l
or telephone line
JY-ST . . . *0.6 mm
l
.
