Explanation of functions
GB-10
Light sensors/Explanation of functions
GB-9
GB
+/- buttons
The following operations are possible using the
+
and
-
buttons:
Light sensors
Note:
If you wish to connect a light sensor to the AstroTec, the
instructions provided with the light sensor must be followed.
Explanation of functions
MAN/AUTO sliding switch
In the “
MAN
” sliding switch setting, only manual command con-
trols and alarm signals are executed.
In the “
AUTO
” sliding switch setting, manual and automatic
command controls are carried out (e.g. shade function, time, astro
function,...)
Alarm signal control light
When the alarm signal control light is illuminated, this indicates an
alarm signal. A continuous switching signal at the group or
individual control inputs for more than 5 seconds signifies an alarm
signal.
Group control
Group control refers to the control of several drives at the same
time. The chosen group is controlled by executing a control
command.
Operating mode
The time is shown in the display.
OK button
When the
OK
button is pressed, the values currently displayed are
saved.
MENU button
By pressing the
MENU
button, you can see an overview of the
menu or the operating mode.
The values currently displayed are
not
saved.
RESET button
When the
RESET
button is pressed (with a ballpoint pen or
similar object), the AstroTec reverts to the default setting.
Exceptions:
Function, language and city menu levels.
Time/date
TIME/DATE
This menu is used to set the time and the date.
• Menu
W
change value
• Auto
mode
W
request information
• +
button
W
next automatic switching time
v
• –
button
W
next automatic switching time
b
+
button and
OK
button
W
astro time
v
–
button and
OK
button
W
astro time
b
