13. DELAY, REVERB AND MIXER PARAMETERS
69
13.6 MIXER PAGE 3
This page is used to set up the incoming external audio from INPUT L/R and to configure the routing of the
audio from INPUT L/R in relation to the Analog FX block. For more information, please see “5.4 ANALOG FX
BLOCK” on page 17.
Press
[FUNC]
+
[LFO]
three times to access this parameter page.
12.3.1 IN LR
Input LR Level sets the level of the audio from the
INPUT L/R
inputs. I can be configured as a mono or a
stereo input. For more information please see “14.6.1 EXTERNAL IN” on page 76.
12.3.3 DEL
Delay Send sets the amount of audio from the
INPUT L/R i
nputs that is sent through to the delay effect.
For more information, please see “13.2 DELAY” on page 66.
12.3.4 REV
Reverb Send sets the amount of audio from the
INPUT L/R
inputs that is sent through to the reverb
effect. For more information, please see “13.3 REVERB” on page 67.
12.3.2 BAL
Balance sets the balance of the audio from the
INPUT L/R
inputs.
12.3.7 IN
Input FX Routing sets if audio from the
INPUT L/R
inputs will be routed through the Analog FX block
(
PRE
) or not (
POST
). For more information, please see “5.4 ANALOG FX BLOCK” on page 17.