14. SETTINGS MENU
72
14.3.4 RELOAD FROM PROJ
You must have saved the pattern at least once before you can reload pattern information.
• WHOLE PATTERN
Reloads the active pattern’s sequence data and kit from the +Drive. A prompt will
appear when you select this option. Press
[YES]
to reload, or
[NO]
to cancel the operation.
• KIT DATA
Reloads the active pattern’s kit from the +Drive. A prompt appears when you select this
option. Press
[YES]
to reload, or
[NO]
to cancel the operation.
• SEQUENCE DATA
Reloads the active pattern’s all sequence data from the +Drive. A prompt appears
when you select this option. Press
[YES]
to reload, or
[NO]
to cancel the operation.
14.3.5 AUDIO ROUTING (PATTERN)
Here you find number of audio routing options that affects the Syntakt on a pattern level. You can also
set the audio routing on a global level. For more information, please see “14.6 AUDIO ROUTING (GLOB-
USE GLOBAL SETTING
uses, when ticked, the global audio routing settings for the active pattern.
ROUTE TO MAIN
Use this option to customize which of the 12 2 effects (Delay, Reverb) that
sends audio to the MAIN OUT outputs. Use the
[TRIG 1–12]
keys and the
[FLTR]
, and
[AMP]
[PARAM-
ETER]
keys to activate/deactivate send from each track and effect. Green keys signal send to main.
Red keys signal do not send to main. Note that each track still sends to its TRACK OUTPUTS.
SEND TO FX
Use this option to customize which of the 12 the Delay effect that sends audio
to the effects (Delay, Reverb). Use the
[TRIG 1–12]
keys and the
[FLTR]
key to activate/deactivate
send from each track and effect. Green keys signal send to the effects. Red keys signal do not send to
the effects.
•
Audio from the TRACK OUTPUTS is always without any effects.
•
Tracks that are routed to not send audio to MAIN OUT still send audio on separate outputs
in Overbridge.
14.4 MIDI CONFIG
In this menu, various sub-menus dealing with the MIDI functionality of Syntakt are found.
14.4.1 SYNC
Controls how Syntakt receives and sends MIDI clock and transport commands. Change settings by using
the
[LEFT]
/
[RIGHT]
arrow keys or the
[YES]
key.
