9. THE SEQUENCER
39
then press
[UP]
/
[DOWN]
to access the pop-up Retrig menu that shows the retrig actions for the chosen
sequencer step(s) on the active track. To exit the Retrig menu, release the
[TRIG]
key(s). The retrig settings
are stored in the active pattern.
RETRIG
Turns the retrig lock ON/OFF. Use
DATA ENTRY
knob
A
to turn retrig on/off.
RATE
Sets the retrig rate (1/1, 1/2, 1/3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/12, 1/16, 1/20, 1/24, 1/32, 1/40, 1/48, 1/64 or
1/80). 1/32 is the default retrig rate. 1/32 corresponds to two trigs per step. To trig triplets, for example,
set the retrig rate to 1/12 (or 1/24). You can also press the
[UP]
/
[DOWN]
keys when you are in the retrig
menu to adjust the rate.
LEN
Sets the duration of the retrig velocity curve in fractions of, or rational or integer multiples of, a step
(0,125–INF). 1/16 is the nominal length of one step. This setting affects the behavior of the velocity curve
by defining the boundaries of its envelope.
VEL
Sets the velocity curve fade out/fade in of the retrig (-128–127). -128 corresponds to a complete
fade out during the set length, -64 fades out to half the velocity during the set length, 0 equals a flat
velocity curve with no fade, 64 fades into half velocity during the set length and 127 fades in completely
to full velocity during the set length.
9.6 QUANTIZE MENU
The quantization affects all micro timed and off grid trigs on the sequencers tracks. Press
[FUNC]
+
[TRIG PARAMETERS]
to access this menu. Change settings with
DATA ENTRY
knob
E
and
F
.
TRK.
affects all the trigs of the active track in real time. The higher the quantize value, the more the
trigs will be quantized. Press
[TRIG 1–12]
key to select track to quantize. (0–127)
GLOBAL
affects all the trigs of all tracks in real time. The higher the quantize value, the more the trigs
will be quantized. (0–127)
Press
[NO]
to exit the menu.
9.7 METRONOME MENU
The METRONOME menu controls the internal metronome of the Syntakt. Press
[FUNCTION]
+
[PTN]
and
hold for a second to open the METRONOME menu. Use the
DATA ENTRY
knobs to change the settings.
ACTIVE
activates/deactivates the metronome. You can also press
[FUNC]
+
[PTN]
to toggle the metro-
nome on and off when you are not in the METRONOME menu.
