16. SETUP EXAMPLES
81
16. SETUP EXAMPLES
The Syntakt likes to play with other machines. Whether it uses its ability to sync and play with legacy ma-
chines or controls other synthesizers: Syntakt gets along with other gear.
16.1 SYNTAKT WITH A MONOPHONIC BASS MACHINE
The DIN sync capabilities of the Syntakt allows you to use gear from yesteryear.
In this example, a legacy monophonic bass machine is used alongside the Syntakt. The Syntakt can stop,
start and control the tempo of the bass machine.
1. Prepare a bassline pattern on the bass machine.
2. Connect the output of the bass machine to the mixer using a Mono jack 6.3 mm male cable.
3. Connect the Syntakt audio outputs to the mixer using 2 x Mono or Stereo jack 6.3 mm male cables.
4. Use a DIN connector cable to connect the MIDI OUT of the Syntakt to the SYNC IN of the bass
machine.
5. On the Syntakt, press
[SETTINGS]
, and then navigate to MIDI CONFIG > PORT CONFIG and set
OUT
PORT CONFIG
to DIN24.
6. Press
[PLAY]
on the Syntakt.
