manualshive.com logo in svg

Elektron Syntakt, User Manual, Page: 94 / 118

Share
Download
Elektron Syntakt User Manual Download Page 94

APPENDIX A: MACHINES

94

HOLD

 (Hold Time) sets the hold time, the time before the decay phase starts.

TRAN

 (Transient) sets the tick or noise transient sound and its level.

OVER

 (Overdrive) sets the gain amount into the analog overdrive.

BD FM

TUNE

 (Tune) sets the pitch of the first (modulated) oscillator.

STIM

 (Sweep Time) sets the pitch sweep time of the first (modulated) oscillator.

FM D

 (FM Decay) sets the length of the decay phase of the second (modulating) oscillator and, con-

sequently, the decay time of the FM effect.

DEC

 (Decay) sets the length of the decay phase of the first (modulated) oscillator and, consequently, 

the whole drum sound.

FM T

 (FM Tune) sets the pitch of the second (modulating) oscillator.

FM S

 (FM Sweep Time) sets the pitch sweep time of the second (modulating) oscillator.

FM A

 (FM Amount) sets the amount of frequency modulation the second oscillator subjects the first to.

OVER

 (Overdrive) sets the gain amount into the analog overdrive.

BD PLASTIC

TUNE

 (Tune) sets the pitch of the two interacting oscillators.

STIM

 (Sweep Time) sets the pitch sweep time of the two interacting oscillators.

SDEP

 (Sweep Depth) sets the depth of the pitch sweep.

DEC

 (Decay) sets the length of the decay phase.

TYPE

 (Modulation Type) The first is linear Frequency Modulation between the oscillators. The second 

is FM combined with ring modulation.

MOD

 (Modulation Level) sets modulation depth.

TICK

 (Tick Level) sets the level of the transient tick.

OVER

 (Overdrive) sets the gain amount into the analog overdrive.

Summary of Contents for Syntakt























































































































Reviews:

No comments