Resistance Welder MULTISPOT MI-100
Operation
34
Tipping and toppling hazards due to high centre of gravity and obstacles during travel
CAUTION ! Tipping and toppling may cause damage to property.
This equipment’s centre of gravity is relatively high. In the event the wheels jam and/or block
(due to an obstacle or transverse pull, for instance), there is a danger the equipment tips
over. Therefore:
Move this equipment always using the handles.
Keep potential obstacles out of the work area.
Install cables and supply lines in such a way that they do not constitute a stumbling
trap.
There is a danger the equipment rolls away because the wheels must not be blocked due to the
tipping and toppling hazard
CAUTION ! Equipment rolling away may cause damage to property.
The wheels of the equipment must not be blocked because this would cause a tipping and
toppling hazard. On the other side, though, this detail causes and increases the danger the
equipment rolls away. Therefore:
Be sure to operate this equipment only on a flat and even floor.
Proceed with care when moving this equipment.
Personal protective equipment (PPE)
Non-inflammable safety clothing
is a tight-fitting sort of special clothing that is not inflammable, covers arms and legs
completely and tears easily (instead of getting pulled in). Its main purpose is to protect
against burns.
Face screen
protects the face and eyes against splashes, flying sparks and other hot particles.
Welder’s gloves
protect the hands against splashes, flying sparks and other hot particles, and prevent
contact with hot surfaces.
Safety shoes
protect the wearer’s feet against falling objects, slippery surfaces and being run over by
vehicles.
Furthermore:
no long hair, rings, necklaces, watches and/or other sorts of jewellery. Do not carry easily
inflammable objects in your pockets (matches, lighters etc.).
Be sure to be always wearing the appropriate PPE for the job at hand.
Be sure to take note of and comply with warning signs concerning PPE that may be
installed at the workplace.
