Resistance Welder MULTISPOT MI-100
Operation
38
6.5.3
High-speed planishing hammer „SAH“ (special accessory)
Small dents, scratches or hail pitting can easily be removed with the high-speed planishing
hammer (42).
1.
Grind damaged area to a bright metal
finish.
2.
Insert high-speed planishing hammer
(Fig. 45) (with weld on tip) into the gun.
3.
Select "SAH" mode and sheet
thickness on display (Sheet steel
thickness above 0.8 mm cannot be
selected). Fine-/–, if
necessary.
4.
Position weld-on tip of the hammer in
the damaged area.
5.
Press release button of the gun and
weld-on welding tip.
6.
Beat out the dent.
7.
Twist the high-speed planishing
hammer (SAH) off the sheet steel.
Select the weld time as short as
possible.
8.
From time to time, dress the weld-on
tip with a file.
Fig. 45: High speed planishing hammer‚ SAH’
(special accessory)
NOTE!
Repeat the procedure until the damaged area is entirely repaired.
CAUTION!
Heavy dents only remove with extractor tool and 8mm washer, as otherwise the
welding gun might be damaged!
NOTE!
If the weld-on tip is worn out, it should be replaced. For replacement unscrew the socket-head
cap screw at the top of the hammer (SAH) and remove the worn out weld-on tip. Position new
weld-on tip and properly tighten socket-head capscrew!
For item number please see spare parts list.
