Resistance Welder MULTISPOT MI-100
Health and safety
12
There is a danger the equipment rolls away because the wheels must not be blocked due to the
tipping and toppling hazard
CAUTION ! Equipment rolling away may cause damage to property.
The wheels of the equipment must not be blocked because this would cause a tipping and
toppling hazard. On the other side, though, this detail causes and increases the danger the
equipment rolls away. Therefore:
Be sure to operate this equipment only on a flat and even floor.
Proceed with care when moving this equipment.
Danger to control panel
CAUTION ! Control panel may sustain damage.
The control panel may sustain damage when being closed if negligent employees leave objects
lingering on the accessory box beneath. Therefore:
Never put objects on the accessory box beneath the control panel.
Proceed with care when closing the flap cover with integrated control panel.
2.4 Correct behaviour in accidents and dangerous situations
Preventive measures
Be prepared to confront accidents and fires.
Be sure to have first aid equipment (kits, blankets etc.) and fire extinguishers ready at hand.
All personnel must know about accident signalling systems, first aid, rescue and escape
equipment.
Keep access ways for ambulances clear and open.
Measures to be taken in case of accidents
Turn off power switch.
Initiate first aid.
Evacuate people from danger zone.
Alert persons in charge.
Alert fire brigade and ambulance service.
Keep access ways for ambulances clear and open.
2.5 Measures to be taken in case of work at the device
De-energise.
Secure against restarting (e. g. pull out mains plug).
Unstressedness
determine.
Ground and short circuit.
Neighbouring energized parts cover or provide with gates.
