Page 26
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
EL 9000 B 15U/24U Series
2.3.3 Installing the device
•
Select the location for the device so that the connection to the source is as short as possible
•
Leave sufficient space behind the equipment for ventilation, at least 50 cm
•
Never place the cabinet’s rear in front of flammable material (wood, paper, fabric, plastic etc.),
because the power dissipation of up to 43 kW, depending on the model, is exhausted in form
of hot air
•
For models with installed emergency off switch (optional, see
) it is required to leave an
additional space of at least 30 cm on top of the cabinet
The cabinet must only be installed and operated on horizontal grounds. Even when secured against rolling off it
could start sliding when being installed on a slanting ground.
It is recommended to secure the cabinet against rolling off
after
transport to the target location and
before
starting
to connect any wiring. It can be done by unscrewing the pedestals in the wheels.
