15
1. Select
“CLLT”
by pressing
[UP]
button.
2. Press
[ENTER]
, the display shows
“ON”
or
“OFF”
.
3. Press
[UP]
to select
“ON”
to enable this function or
“OFF”
if you don’t.
4. Press
[ENTER]
to confirm.
5. Press
[EXIT/DN]
to return to the main menu.
- Main menu 5
1. Press
[ENTER]
for 3 seconds to enter the main menu
(display flashing).
2. Press
[UP]
to select
“EDIT”
.
- Define the number of steps in Run
This function defines the number of steps in the Program
Run.
1. Select
“STEP”
by pressing
[UP]
button.
2. Press
[ENTER]
, the display shows
“S-XX”
, “X” stands
for the total amount of steps you want to save, so you
can call up to 48 scenes in
“RUN”
. For example if the “XX”
is 05, it means that
“RUN”
will run the first 5 scenes you
saved in
“EDIT”
.
3. Press
[ENTER]
to save and exit.
- Editing the channels of the individual scenes
This function can edit the program to be called up in Run.
a) Editing via the Control Board
1. Select
“SC01”
by pressing
[UP]
button.
2. Press
[ENTER]
, the display shows
“SCXX”
, “X” stands
for the scene no. to be edited.
3. Change the scene no. by pressing
[UP]
.
4. Press
[ENTER]
, the display shows
“C-X”
, “X” stands
for the channel no. Such as
“C-01”
, it means you are
editing channel 1 of the selected scene.
5. Select the channel number you would like to edit by
pressing
[UP]
.
6. Press
[ENTER]
to enter editing for the selected channel,
the fixture reacts to your settings. The display shows the DMX value of the edited channel. Such as “ 11XX”, it
stands for in the channel 11 of the editing scene, the DMX value is XX , XX is a hexadecimal number value
“01-FF”.
7. Adjust the desired DMX value by pressing
[UP]
or
[DN]
.
8. Press
[ENTER]
in order to edit other channels of this scene.
9. Repeat steps 5-9 until you finish setting all the DMX values for all channels of this scene.
10. Once all the channels completed, the display will flash
“tIME”
11. Press
[ENTER]
to edit the time needed, the display shows “t--X”,“X” stands for the time needed to run the
current scene, value “1-9”. For example, “t--2” means you need 2 seconds to run the current scene.
12. Adjust the desired time by pressing
[UP]
.
13. Press
[ENTER]
to save the settings for the scene you are editing, the display will change to the next scene
automatically.
14. Repeat step 3-14 to edit and other scenes, you can edit and save a maximum of 48 scenes.
15. Press
[EXIT/DN]
to exit. The number of steps can be defined under
“STEP”
and the scenes can be called
up under
“RUN”
b) Editing via the external controller