the fist slave to
DMXin
on the second etc.
DO NOT
select slave mode if it is the only luminaire that
is operating.
STATIC COLOUR mode.
To select STATIC COLOUR mode, press the MODE button
repeatedly until
CoLl-
is shown in the display.
Then press Setup to select
l-
for red,
G
for green or
b
for blue.
Then use the UP and DOWN buttons to select the
brightness level of each colour.
DMX mode.
The
DMX START ADDRESS
is the DMX address of the
first DMX control channel. The 2nd DMX channel is at
the DMX start a 1, the 3rd DMX channel is at
the DMX start a2, etc.
DMX mode:
The NJ174 may be controlled from DMX in 6 different
modes:
2-channel mode
uses two channels to control the
luminaire - the first channel selects the program, and the
second channel selects the speed.
In
3-channel mode
the luminaire is entirely illuminated
in the same colour. The three channels select the colour
as follows:
first channel - sets the brightness of the red LEDs.
second channel - sets the brightness of the green LEDs.
third channel - sets the brightness of the blue LEDs.
Page 6