![background image](http://html.mh-extra.com/html/philips/bvp483/bvp483_installation-instruction_300842001.webp)
Installation Instruction
Industrial Luminaire
LED FLOOD LIGHT
Application
: Outdoor only
Type
: BVP483
Max. Projected Area
: 0.14 m²
Voltage
: 240 V, 50 Hz
IP Classification
: IP 66
Lamp
: LED
Net Weight
: 7.0 kg Approx
CCT : 5700 K
IP-66
ta
35
Industrial Luminaire
LED FLOOD LIGHT
Dimensions in mm
Caution
: Mounting to be done using M12 Bolts(3x)
Warranty void if earthing is not connected.
Installation Instruction
372
536
588
62
94
28
28
Ø16.2
186
100
200
CAUTION
1. Ensure L-N-E is connected in right manner.
2. Ensure 3 core cable for Connections(Outer diameter 8-10 mm, multi strand 1.5 sq. mm thickness)
with IP-65 protected cable joint (Follow steps 2,3,4 & 5 for 3 Core cable assy, only if required).
3. 3 Core cable should be properly connected with ground.
4. Ensure mounting bracket is properly mounted with three M12 bolt at 30 N-m torque.
5. Product should be operated between 120-270V A.C.
6. Luminaire must be brought down from the mounting position for maintenance.
7. In case the Lensplate is found broken/damaged it should not be powered on and is to be replace
before using the luminaire.
8. The light source of this luminaire is not replaceable, when the light source reaches
its end of life the whole luminaire shall be replaced.
FAILURE OF PRODUCT DUE TO NON COMPLIANCE TO ANY OF THE ABOVE, VOIDS WARRANTY
OF PRODUCT.
All the pictures in the MI sheet are representative only and may vary from the Actual Product.