OPERATION
There are 6 modes of operation: Built-in programs, Auto-
run, Slave, Sound, Static Colour and DMX. These are
selected using the MODE pushbutton switch on the rear
panel.
BUILT−IN PROGRAMS mode:
Press the MODE button repeatedly until
Pr
is shown in
the first two characters of the display. Then use the UP
and DOWN buttons to select the required program.
Pressing the SETUP button allows other functions to be
changed:
In programs 2 to 22, the following parameters can be
adjusted:
FS
= flash frequency
SP
= run speed
Fd
= fade time
Each of these parameters can be changed by pressing
the UP and DOWN buttons.
In programs 21 and 22 the background and foreground
colours can be set. Press the MODE button for <1
second to select which function is to be adjusted.
1.--
sets the background colour.
1.-r
is red,
1.-b
is blue,
1.-9
is green,
1.r9
is yellow,
1.rb
is magenta,
1.b9
is cyan,
1.FF
is off, and
1.FL
is white. Press the INCREASE or
DECREASE buttons to select the colour.
2.--
sets the foreground colour.
2.-r
is red,
2.-b
is
blue,
2.-9
is green,
2.r9
is yellow,
2.rb
is magenta,
2.b9
is cyan,
2.FF
is off, and
2.FL
is white. Press the
INCREASE or DECREASE buttons to select the colour.
Page 4
