1. Disconnect AC power before servicing.
2. Refer to wiring diagram for proper connections.
3. All servicing should be performed by qualified personnel.
4. Consult your local building code for approved wiring and installation.
5. Do not use this equipment for other than intended use.
6. Do not let power cords touch hot surfaces.
7. Mount and secure the fixture at a location and height to avoid ready access
and tampering by unauthorized persons.
8. The use of accessory equipment is not recommended by the manufacturer
and may cause an unsafe condition.
9. Suitable for wet locations. See product label for temperature limitations.
IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SUITABLE FOR WET LOCATIONS
AMBIENT TEMPERATURE LIMITS:
Standard "BB" models: -20º C to +40º C
High Temp "BB" models (SW): -20º C to +45º C
Remote models: -40º C to +50º C
J- Box and Supply Wiring
1. See above. Assemble standard 4” x 4” deep j-box with 1 ½” extension. Note available knock-outs for
wiring. Remove K.O's in areas shown for wiring and connecters.
2. Align edge of extension flush or just below finish panel surface.
3.
SECURITY LIGHTING SWITCH CONTROL (OPTION -SW)
AVAILABLE K.O.'S
4 PLACES
SET EDGE OF BOX
FLUSH TO WALL
FINISH OR
PANEL THICKNESS
STANDARD J-BOX
4 x 4 x 21/8"
EXTENSION RING
4 x 4 x 11/2"
ITEM QTY P/N
DESCRIPTION
1
1
346302 CANOPY POWER ASSBY
2
1
206110 BATTERY PACK 3.6V
3
1
206117
BATTERY PACK 4.8V
4
1
346200
LAMP HOUSING ASSBY
2 3
LAMP
PLUG
4
L N G
120/277 VAC
BUILDING SUPPLY
Black
Red
White
1
OPTIONAL NORMAL ON
CONTROL SWITCH WIRING
GROUND
TO J-BOX
INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL
LED Architectural Emergency Light with Battery Backup
Series MAEBB
Moonlite LED
™
5.15.03
SEC CONTROL INPUT VOLTS
STANDARD FIXTURE = 120 VAC
DG FIXTURE = 120/ 277 VAC UNIVERSAL
BATT
L
N
LAMPS
RED
(LINE)
BLACK
WHITE
SEC CONTROL
MAKE- SEC ON
BREAK- SEC OFF
120 / 277 VAC
UN- SWITCHED NORMAL INPUT
POWER
SUPPLY
