Electrostatic Technology, Inc.
Trickle Impregnation System
Serial #18028
51
15.2 BAD
PART
(continued)
BAD PART - SYMPTOM
POSSIBLE CAUSE(S)
REMEDY(S)
Low part temperature entering
Trickle area
Turn Induction Heater setting up.
Cure Tunnel temperature set too
low
Turn Cure Tunnel temperature
setting up.
Resin not cured
Resin mixed incorrectly
Correctly remix a new batch of
resin.
Mis-aligned Nozzles
Re-align Nozzles (move photo
eye).
Resin on O.D. of part
Resin flow rate too high
Lower resin flow rate.
Summary of Contents for 18028
Page 4: ......
